• 29420E

Thrust Roller Bearings

These bearings have a self-aligning nature that uses barrel-shaped rolling elements, with a spherical surface on which the raceway surface of the housing raceway washer (outer ring) is centered on the guide sleeve. They can bear high axial loads.

As there are many sliding surfaces such as the roller end surfaces and the cage, oil lubrication must be used even in low-speed operation.

CONTACT US

Description

Bearing No. Boundary Dimensions Load Ratings Reference Speed Weight
Description d D B Dynamic
Cr
Static
C0r
Grease Oil
mm mm mm kN kN RPM RPM kg
29320 100 170 42 408 1290 1500 2000 3.65
29322 110 190 48 535 1730 1300 1800 5.3
29324 120 210 54 656 2120 1100 1600 7.35
29326 130 225 58 753 2500 1000 1500 9
29328 140 240 60 845 2850 950 1400 10.5
29330 150 250 60 863 2850 900 1300 11
29332 160 270 67 1010 3450 850 1200 14.5
29334 170 280 67 1050 3550 825 1150 15
29336 180 300 73 1240 4300 800 1100 19.5
29338 190 320 78 1400 4750 750 1000 23.5

 


Bearing No. Boundary Dimensions Load Ratings Reference Speed Weight
Description d D B Dynamic
Cr
Static
C0r
Grease Oil
mm mm mm kN kN RPM RPM kg
29420 100 210 57 863 2500 1100 1600 10.5
29422 110 230 73 1010 3000 950 1400 13.5
29424 120 250 78 1170 3450 900 1300 17.5
29426 130 270 85 1380 4050 850 1200 22
29428 140 280 85 1400 4300 825 1150 23
29430 150 300 90 1610 5100 800 1100 28
29432 160 320 95 1790 5600 750 1000 33.5
29434 170 340 103 2020 6550 700 950 44.5
29436 180 360 109 2250 7350 670 900 52.5
29438 190 380 115 2480 8000 630 850 60.5
29440 200 400 122 2760 9000 600 800 72
29444 220 420 122 2880 9650 560 750 75
29448 240 440 122 2990 10200 530 700 80
29452 260 480 132 3510 12900 500 670 104
29456 280 520 145 4310 15300 480 630 134